[{"content":{"text":"

Maximum Watt/Seconds: 1,000
Flash Variability: 11 f/stops (1.0 - 1,000W/s)
Distribution: Asymmetrical/Symmetrical
Socket A: 1.0 - 1,000W/sSocket B: 1.0 - 660W/s
Asymmetry range: 7.4 stops
Increments: full stops or 1/10 stops
Battery type: LiFe Li-Ion
Capacity: 50,000 - 220 flashes Recharge: 45 min, no slow mode - fast mode only
Recycling Time:0.03 - 0.99 Seconds
Flash Duration: 1/25,000 - 1/2,200 Sec.
Modeling Light: Total wattage supported: 500W (1x 500W or 2x 250W)
Modes: Off, Continuous, Timer 10 - 120 sec.(Continuous unlimited operation with charger connected, 100W for 35 minutes with battery alone MAX, PROP, MAX PROP
Voltage Stabilization: +/- 0.5%Head
Outlets: 2
Guide Number: f/64.8 @ 6.6' (2.0 m) ISO 100 with Magnum reflector and ProHead Plus
Triggering Sync socket: 1
Connector size: 1/4\" (6.35 mm) phono plug
Sync voltage: compliant to ISO 10330 standard - Photocell/IR-slave (switchable)
Integrated Profoto Air Receiver (8 channels, 6 groups)
Transmitter: optional Air Sync or Air RemoteRadio range: 985'(300 m)
Computer control and triggering: via USB interface and Profoto Studio 3 software
Aux. control: Normal and Freeze mode
Display Digital: LED
Fan Cooled: Yes
Flash Ready Indicator: Ready lamp and switchable beep or buzz sound
Auto Dump: Yes
Voltage: 100 - 240VAC, 50/60Hz charger
Certified for travel: The battery has been tested and certified according to UN manual of Test and Criteria, Part III, Sub-section 38.3. The certificate makes the battery flight approved all over the world.
Dimensions: 12.4 x 7.1 x 9.8\" (31.5 x 18 x 25 cm)
Weight: 21.6 lb (9.8 kg) including LiFe battery

"},"id":"d05ed942-6c08-4223-92c1-4f76a747635a","isHidden":false,"type":"text"}]